DiecastXchange Forum banner

Wheel Swap question

2K views 2 replies 2 participants last post by  JSB 33 
#1 ·
If anyone that has a Maisto Mercedes S Class sedan and a Maisto Mercedes SLR, could you look to see if the wheels from the SLR look like they would fit inside the wheelwells of the S Class?
Thanks!
 
#2 · (Edited by Moderator)
The front wheels pose no problems both height and widthwise. The rear wheels of the SLR will be a tight fit on the S class because of the width (2-3 mm wider). The lower wishbone which is screwed to the spring may pose a slight problem if any. There might be only a tiny clearance between the part and the rear brake assembly.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top