DiecastXchange Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
923 Posts
Discussion Starter · #1 ·
I've started re-assembling the model now. I've put back on the front and rear bumpers with the head and taillights as well as the rear windows. At the moment, I'm doing the final touches to the interior and then I'll start fabricating a fuel tank.

 

·
Registered
Joined
·
994 Posts
That looks cool! Is it going to be that concept V6 Smart? Because then yuo should drill slots in the rear side windows.
Looking good so far! :cheers
 

·
Registered
Joined
·
923 Posts
Discussion Starter · #6 ·
I've changed the brakes as well on the model now. I removed the front discs and replaced them with the discs from Bburago's Ford Focus WRC kit. I removed the rear drums and replaced them with the discs that were originally on the front. I painted the brake mountings red as they are on the real car.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top