DiecastXchange Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
650 Posts
This is how it is on my Canon G5...

Click the SET button (the white box turns green on the LCD), then you press the scrolling buttons (up, down, left, right - that you would use to scroll through menus), once you got it in the place you want it, click the SET button again and the now green box should turn white and then shoot :)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top