DiecastXchange Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
10,816 Posts
Discussion Starter · #1 ·
G

·
This sounds good! I'm curious, the picture doesnt show but how do the hinges and knob look?

:cheers
 

·
Registered
Joined
·
8,936 Posts
Thanks for that post Al! That design looks very clean! I used Ikea glass shelves instead of the original wood ones that came with the display case. That way, I was able to put in more shelves since the glass ones are 1/3 to 1/4 of the thickness of the wood ones. Depending on where the hinges are located on the doors, a few shelves may have to be re-located up/down to avoid them.
 

·
Registered
Joined
·
10,816 Posts
Discussion Starter · #9 ·
I went by the local store today and these doors will look good. The hinges look to be in the same location as the wood doors. The knob/pulls are small and flat so they don't upstruct the view.
They come in clear and frosted (flowery) glass. Also the clear glass ones have an insert where you can block the view.

The aluminum frame appears very sturdy, more so than the wood frame.

I also saw that the Billys now come in green! :error
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top