DiecastXchange Forum banner


1583 Views 15 Replies 8 Participants Last post by  Ford GT
i shot a sequence of shots that i did the custom recently.
i only done it to one side. dunno if i have time to finish it up.
ill post the picies one by one.

i use the same chemistry as the real kit.
where the door need to be opened to 15deg then tilt.
in this case the door can not be vertically horizontal as the hinge and the interior are to close. and the the door cannot be tilted up to far as the is no more room inside the guard.

thank you for your comments guys..

btw the tape that are on the car is to protect the paint from scratches :D

:happytwo :feedback
1 - 1 of 16 Posts
While I'm not very fond of scissor style doors on cars other that exotics.
I'll still give you credit on an excellent job!!! :nicejob :nicejob :nicejob
1 - 1 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.