DiecastXchange Forum banner

Painting: I think I've seen this before, but...

944 Views 7 Replies 5 Participants Last post by  StygianMax
As I dive back into this whole painting thing, I was looking over a few articles I had bookmarked. The finished product this guy gets is still stunning.

How to lay down perfect paint

Also, since there have been a bunch of questions on painting in general in the past, there's also another topic on this page that shows and explains common painting problems.

Paint problems and Solutions
1 - 1 of 8 Posts
Great link TF1! Thanks for posting that. :cheers

The author has got a good sense of humour:

First, always heat the can in medium hot water before you use it. Always read the label to be sure you don't get it too hot. If you over heat the can, it could explode and instantly paint the room instead of the model. Not the desired effect!

1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.