DiecastXchange Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5,284 Posts
<{POST_SNAPBACK}>[/post][/right]
Felix-I use Testor's rattle cans. I usually strip the car completely with Klean-Strip aerosol stripper (got to make sure you get all the plastic parts off the diecast parts, as this stuff will turn the plastic into goo). Then I put on about two coats of primer, and then about two coats of color. After each coat of either primer or paint, I bake the car in the oven (at about 250 degrees F) for ten to twelve minutes, and then let it heat soak with the oven off for another ten to twelve minutes. You can usually put another coat of primer or paint over the first one after you have let the entire model cool down for about 30 minutes, or so.

:rockon
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top