DiecastXchange Forum banner
1 - 2 of 67 Posts

· Registered
Joined
·
1,633 Posts
The thing with Tecnomodel is that they tend to make models of things you'll never see anyone else make.

Yes, they're a bit crude and look like RC model shells rather than having, say, Spark like quality, but 9 times out of 10 (or maybe 99 out of 100), you'll never see their models reproduced by any other manufacturer!

The 966 looks pretty decent and I'm sure there are plenty of Porsche fans who will snap up the chance to own this obscure racer, in all the liveries!

M
 

· Registered
Joined
·
1,633 Posts
Good to know it's not a big disappointment.

With Tecnomodels you need to suck up the cost/quality ratio as, most of the time, they are your only option for a specific model and they should be applauded for their varied and unusual choices.

They could just trot out the same models as everyone else and charge a bit less, but a lot of collectors are (all SHOULD be) happy to see variety in 1:18 even if it, inevitably, comes at a cost.

M
 
1 - 2 of 67 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top