DiecastXchange Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
135 Posts
Discussion Starter · #1 ·
When painting wheels, do you guys also use paint remover or sand the paint off, then prime and paint, or do u guys just prime and paint right away?
 
G

·
If the wheels are easy to sand, which is very rare, I will take the time to sand them. Other wise a nice coat of primer and then a couple coats of paint should suffice. Depending on the wheel I will also lay a coat of clear.

Hope that helps. :mrgreen:
 

·
Registered
Joined
·
135 Posts
Discussion Starter · #3 ·
yup, helps a lot...I was lost trying to sand the original finish.
Thanks :mrgreen:
 

·
Registered
Joined
·
42 Posts
If the wheels are easy to sand, which is very rare, I will take the time to sand them. Other wise a nice coat of primer and then a couple coats of paint should suffice. Depending on the wheel I will also lay a coat of clear.
:iagr: ;-)
 
1 - 4 of 4 Posts
Top